Gamma 0x00980910 (int) : min=0 max=3 step=1 default=1 value=1 flags=slider Intel play qx3 microscope software and driver full#

Illuminator_1 0x00980925 (bool) : default=0 value=0 flags=update Sharpness 0x0098091b (int) : min=0 max=2 step=1 default=1 value=1 flags=slider Illuminator_2 0x00980926 (bool) : default=0 value=0 flags=updateįor at least this version (revision 2) of the QX5, illuminator_1 refers to the scope/upper light, and illuminator_2 refers to the stage/lower light, opposite of the QX3 behavior. If both illuminator values are set to '1', the microscope will deactivate the first light and activate the most recent assigned light. Usbcore: registered new interface driver cpia1 usb 1-1.3: Product: Intel Play QX3 Microscope usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-1.3: New USB device found, idVendor=0813, idProduct=0001, bcdDevice= 1.60 usb 1-1.3: new full-speed USB device number 5 using ehci-pci If the value for that illuminator is set back to 0, that light will switch back off, and the first light will switch back on. Installation on Debian 4.19.37-5 with QX3 or QX5 Power_line_frequency 0x00980918 (menu) : min=0 max=2 default=1 value=1 QX3 v4l2-ctl device information (device 'video0' because there is no internal webcam, otherwise would be 'video1'):īrightness 0x00980900 (int) : min=0 max=100 step=1 default=50 value=50 flags=sliderĬontrast 0x00980901 (int) : min=0 max=96 step=8 default=48 value=48 flags=slider Intel play qx3 microscope software and driver driver# Then insert your microscope USB cable, and launch vlc. Note again that if your system has an internal webcam, replace 'video0' with 'video1': You can specify the video device as the output in the command line. V4l2-ctl -device=/dev/video0 -set-ctrl=illuminator_2=0 (turn off QX3: scope/upper light, QX5: stage/lower light) V4l2-ctl -device=/dev/video0 -set-ctrl=illuminator_2=1 (turn on QX3: scope/upper light, QX5: stage/lower light) V4l2-ctl -device=/dev/video0 -set-ctrl=illuminator_1=0 (turn off QX3: stage/lower light, QX5: scope/upper light) V4l2-ctl -device=/dev/video0 -set-ctrl=illuminator_1=1 (turn on QX3: stage/lower light, QX5: scope/upper light) There will be check boxes for illuminator_1 and illuminator_2.Īlternatively, you can set the lighting from the command line using v4l2-ctl (omit the part in parenthesis): In the vlc display, you can find the microscope lighting controls by clicking the 'show extended settings' button at the bottom of the window, then clicking on the 'v4l2 controls' tab.

Intel play qx3 microscope software and driver full#.Intel play qx3 microscope software and driver driver#.

Intel play qx3 driver